[Swansea Hackspace] CNC connectors

[Emyr Morris]

I've got a busy couple of evenings but I will try and pop down and measure
and photograph them, failing that we change all three sets with known
connectors?

E

On 25 November 2014 at 09:41, Justin Mitchell <
justin at swansea.hackspace.org.uk> wrote:

>
> > Do you remember what the connectors are on the CNC stepper motors? I'm
> > going to look up CPC for 4-core cable, was going to get a pack of
> > connectors as well - I was going to get 10m of cale in case we need to
> > rewire the whole thing
>
> I should have taken some close up photos of the connector,
> but from memory it looked a bit like a Molex Mini-Fit Jr. series
>
> then again theres a lot of similar connectors, and without a closeup to
> check the details a guess doesnt mean much
>
> _______________________________________________
> Hackspace mailing list
> Hackspace at swansea.hackspace.org.uk
> http://swansea.hackspace.org.uk/mailman/listinfo/hackspace
>



-- 
Mob: 07836 267426

This e-mail and any files transmitted with it are confidential and intended
solely for the use of the individual or entity to whom they are addressed.

Mae'r e-bost hwn ac unrhyw ffeiliau a drosglwyddir gydag ef yn gyfrinachol
ac at ddefnydd yr unigolyn neu'r corff y cyfeiriwyd hwy atynt yn unig.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://swansea.hackspace.org.uk/pipermail/hackspace/attachments/20141125/280effb2/attachment.html>