[Swansea Hackspace] Quick report on Coastal Tenant Fun Day
Gerrit Niezen
gerrit.niezen at gmail.com
Wed Oct 28 11:18:15 GMT 2015
Thanks Tim! At least now you know how/why the printer was in that state. After manning the stall for 7 hours I just didn’t have the energy to fix it.
> On 28 Oct 2015, at 10:10, Tim Clark <eclipse at sucs.org> wrote:
>
> Great news about the Fun Day, glad to see that there was lots of interest.
>
> When in the space yesterday evening I swapped the cable on the printer for one in the makey makey kits, recalibrated the z axis with the bodged z endstop and replaced the kapton on the bed so I could get it working if your careful. Still need a new cable and the bracket reprinting but there is now less urgency about it.
>
> Tim
>
> On 28/10/2015 09:25, Gerrit Niezen wrote:
>> Hi everyone!
>>
>> Yesterday Eleri from TechHub and I represented Swansea Hackspace at the Coastal Housing Tenant Fun Day at LC2:
>> https://twitter.com/SwanseaHack/status/658974645706735617 <https://twitter.com/SwanseaHack/status/658974645706735617>
>>
>> There was a lot of interest, from little kids being amazed by the 3D printer to members of the public (and Coastal employees) getting excited about the possibilities of a hackspace. There was a photographer too, so there may even be photos in the newspaper ;)
>>
>> We had a (Makey Makey) banana piano set up for the kids:
>> - https://twitter.com/TechHubSwansea/status/658967724429877248 <https://twitter.com/TechHubSwansea/status/658967724429877248>
>> - https://twitter.com/TechHubSwansea/status/659048556221870080 <https://twitter.com/TechHubSwansea/status/659048556221870080>
>>
>> Some more good feedback: https://twitter.com/Kirsty_Coastal/status/658988186358689793 <https://twitter.com/Kirsty_Coastal/status/658988186358689793>
>>
>> I started off by printing some whistles, but once the kids figured out that you can make “almost anything”, requests flooded in and a mini-football, mini-pig, mini-pikachu and mini-flower got printed as well.
>>
>> Unfortunately the a couple of things went wrong with the 3D printer (I didn’t want to move it from the space, but my alternatives didn’t work out):
>> - The bracket for the z-axis stop switch broke (it was cracked, but moving the printer didn’t help) - I temporarily fixed it with some blue tack, but we’ll need to print a new bracket
>> - The orientation of the new Rumba board caused the USB cable connector to weaken, which halted prints every time the table got bumped - does anyone have a spare USB cable with mini-B connector?
>>
>> Cheers,
>> Gerrit
>>
>>
>>
>>
>>
>> _______________________________________________
>> Hackspace mailing list
>> Hackspace at swansea.hackspace.org.uk <mailto:Hackspace at swansea.hackspace.org.uk>
>> http://swansea.hackspace.org.uk/mailman/listinfo/hackspace <http://swansea.hackspace.org.uk/mailman/listinfo/hackspace>
>
> _______________________________________________
> Hackspace mailing list
> Hackspace at swansea.hackspace.org.uk
> http://swansea.hackspace.org.uk/mailman/listinfo/hackspace
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://swansea.hackspace.org.uk/pipermail/hackspace/attachments/20151028/103a87c7/attachment.html>
More information about the Hackspace
mailing list