[Swansea Hackspace] Raspbee v's 7inch screen

[Shaun Woodrow]

Hi,

Not sure if this will help but perhaps there is something to consider here

http://raspberrypi.stackexchange.com/questions/
3475/how-to-get-more-than-one-uart-interface


Shaun

On 13 February 2017 at 13:44, Shaun Woodrow <swoodrow at corporate-action.com>
wrote:

> Hi,
> Not sure if this will help but perhaps there is something to consider here
>
> http://raspberrypi.stackexchange.com/questions/
> 3475/how-to-get-more-than-one-uart-interface
>
>
>
> Shaun Woodrow
> Managing Director
>
> The Corporate Action Company
> New Broad Street House
> 35 New Broad Street
> London
> EC2M 1NH
>
> +44 (0)203 009 3160 <020%203009%203160>
> www.corporate-action.com
>
> On 13 February 2017 at 12:19, Richard Morgan <richard.morgan at avocation.co.
> uk> wrote:
>
>> Hi Hackspace,
>> I am working on  my new project that requires:
>>
>> - RPi3
>> - Raspbee Zigbee radio module (Dresden Elektronik)
>> - 7” Raspberry Pi touchscreen
>>
>> I have a problem in that both the screen and the RaspBee module want to
>> make use of the top GPIO pins causing a conflict. I cannot fit both of them
>> to the same pins.
>>
>> Is there a way I can change the pins used by the 7inch display (as this
>> has flying jumper leads) from the designated pins 2nd and 3rd down on both
>> rows of GPIO pins?
>>
>> - Install instructions for 7inch screen: https://thepihut.com/b
>> logs/raspberry-pi-tutorials/45295044-raspberry-pi-7-touch-sc
>> reen-assembly-guide
>> - Install instructions for RaspBe module: https://www.dresden-el
>> ektronik.de/fileadmin/Downloads/Dokumente/Produkte/ZLL/RaspBee-BHB-en.pdf
>>
>>
>> All help gratefully received.
>>
>> Richard
>>
>>
>> _______________________________________________
>> Hackspace mailing list
>> Hackspace at swansea.hackspace.org.uk
>> http://swansea.hackspace.org.uk/mailman/listinfo/hackspace
>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://swansea.hackspace.org.uk/pipermail/hackspace/attachments/20170213/b973a69f/attachment.html>