[Swansea Hackspace] Calibrating the 3d printer?

[David Davies-Day]

I will be in tonight, got a few prints to get on, might run both printers if no one else if printing tonight.

I didn't have much luck using Cura with the coreXY,  Gwion tweaked my Cura setting and all was well, till the filament jammed.

Are there general instructions for using octoprint and the Hackspace printer on the homepage?


No animals were harmed in the making of this email. However, several thousand electrons were severely inconvenienced.

-------- Original message --------
From: Ceri Clatworthy <ceri.clatworthy at gmail.com>
Date:28/02/2017 9:54 AM (GMT+00:00)
To: Swansea Hackspace <hackspace at swansea.hackspace.org.uk>
Cc:
Subject: Re: [Swansea Hackspace] Calibrating the 3d printer?

Unfortunately, due to family issues i haven't been in lately,

but just a reminder,

my printer is there for general usage (money for filament to hackers, as usual)

Any one competent is free to use it,

there should be a Slic3r profile on the SD card.

but gwion has got cura to work well.

Enjoy !

Ceri

On Tue, Feb 28, 2017 at 8:49 AM, Justin Mitchell <justin at swansea.hackspace.org.uk<mailto:justin at swansea.hackspace.org.uk>> wrote:
On Sat, 2017-02-25 at 14:41 +0000, Neil Jones wrote:
> I understand that the 3d Printer needs calibrating. I don't want to
> tread on anyone's toes because someone else offered to do it at the
> AGM, but if it hasn't been done yet I MAY be able to get it done
> quickly.

Sorry for the delay in response, someone else said they were going to
respond.

I did the calibration and rebuilt the control software last night, so
our reprap printer is now safe to use.

You may need to do some experimentation to find the ideal temperature
for your chosen filament, but the temperature will now be accurate, and
so should match the guidelines you find online.

For the curious, the procedure needed was this one:
http://reprap.org/wiki/Thermistor#Calibrating_an_unknown_model_thermist
or_with_a_Thermocouple_thermometer



_______________________________________________
Hackspace mailing list
Hackspace at swansea.hackspace.org.uk<mailto:Hackspace at swansea.hackspace.org.uk>
http://swansea.hackspace.org.uk/mailman/listinfo/hackspace

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://swansea.hackspace.org.uk/pipermail/hackspace/attachments/20170228/633ce1e3/attachment.html>