[Swansea Hackspace] 40W CO2 Laser
Justin Mitchell
justin at swansea.hackspace.org.uk
Thu Dec 18 18:24:37 GMT 2014
Other hackspaces have suggested that a suitable rate is £5 an hour by
the time you cover all the costs involved, the mirrors do gradually
degenerate as well as the laser tube and other parts.
but then, unlike the 3d printer, a job should take minutes not hours.
On Thu, 2014-12-18 at 18:18 +0000, Emyr Morris wrote:
> if we ask our members to pay £1 per laser burn hour for the use of the
> machine then we should more than cover the cost of
> repairs/replacement/upkeep of the machine!
>
> :-)
>
>
> On 18 December 2014 at 18:15, Justin Mitchell
> <justin at swansea.hackspace.org.uk> wrote:
> You did however correctly identify the type of tube we would
> need to buy
> at regular intervals when they burn out, cheap ones claim a
> life of 1000
> hours, but can often be much less.
>
> £110 is roughly the bottom end of the market from what i've
> seen,
> although i was pushing for the 50W version for our starter
> machine
>
>
> On Thu, 2014-12-18 at 18:03 +0000, Ceri Clatworthy wrote:
> > Spoil sport !!
> >
> > On 18 Dec 2014 17:42, "Justin Mitchell"
> > <justin at swansea.hackspace.org.uk> wrote:
> > On Thu, 2014-12-18 at 17:20 +0000, Ceri Clatworthy
> wrote:
> > >
> >
> http://www.banggood.com/40W-CO2-Carbon-Dioxide-Laser-Tube-Laser-Cutter-Part-p-958940.html
> > >
> >
> > > what do we need to drive it ??
> > > we can make our own ..
> >
> > A sturdy X/Y mechanism
> > a high voltage laser psu
> > stepper motors and driver board
> > water circulation pump
> > set of the mirrors and focussing head
> > honeycomb cutting bed
> > air pump for the cutting head
> > air vent pump for the box ventillation
> > and most important of all a big metal LIGHT PROOF
> box to keep
> > it all in.
> >
> > building your own works only if you are building a
> toy 1W one
> > that cuts
> > paper, or you are building a really big one and have
> a
> > metalwork shop to
> > fabricate it with.
> >
> >
> >
> > _______________________________________________
> > Hackspace mailing list
> > Hackspace at swansea.hackspace.org.uk
> >
> http://swansea.hackspace.org.uk/mailman/listinfo/hackspace
> > _______________________________________________
> > Hackspace mailing list
> > Hackspace at swansea.hackspace.org.uk
> > http://swansea.hackspace.org.uk/mailman/listinfo/hackspace
>
>
> _______________________________________________
> Hackspace mailing list
> Hackspace at swansea.hackspace.org.uk
> http://swansea.hackspace.org.uk/mailman/listinfo/hackspace
>
>
>
> --
> Mob: 07836 267426
>
> This e-mail and any files transmitted with it are confidential and
> intended solely for the use of the individual or entity to whom they
> are addressed.
>
> Mae'r e-bost hwn ac unrhyw ffeiliau a drosglwyddir gydag ef yn
> gyfrinachol ac at ddefnydd yr unigolyn neu'r corff y cyfeiriwyd hwy
> atynt yn unig.
> _______________________________________________
> Hackspace mailing list
> Hackspace at swansea.hackspace.org.uk
> http://swansea.hackspace.org.uk/mailman/listinfo/hackspace
More information about the Hackspace
mailing list