[Swansea Hackspace] Tonights Social/3d Printing

Graham Owens grahamowensuk at googlemail.com
Tue Nov 11 00:47:38 GMT 2014


Well I think that was a successful print, the gripper is working well on a carboard box of the same size as the target, but without some sugru or rubber bands on the grippy bits it is struggling with the glass target.

Thanks for helping me out everyone

-----Original Message-----
From: "Tim Clark" <eclipse at sucs.org>
Sent: ‎10/‎11/‎2014 13:39
To: "hackspace at swansea.hackspace.org.uk" <hackspace at swansea.hackspace.org.uk>
Subject: Re: [Swansea Hackspace] Tonights Social/3d Printing

Sure, I've just done  quick slice at 0.4mm and uploaded it, it says it will take about 1.5 hours and use 7.65m of filament.

Tim

On 10/11/2014 12:10, Graham Owens wrote:

Hi All 


If the 3d printer is free tonight, can someone help me to slice and print http://www.thingiverse.com/thing:7109 it is a gripper for the small 9g servo motors.


Ceri,
Does your xy table work in a vertical orientation?  As in mounted on a wall, and would you mind sharing your files for the corner mounts, pulleys etc.


Thanks


Graham

 

_______________________________________________
Hackspace mailing list
Hackspace at swansea.hackspace.org.uk
http://swansea.hackspace.org.uk/mailman/listinfo/hackspace
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://swansea.hackspace.org.uk/pipermail/hackspace/attachments/20141111/70a7d17f/attachment.html>


More information about the Hackspace mailing list