[Swansea Hackspace] PCB made on CNC Mill

[Ceri Clatworthy]

Very good results. ..
Can you use eagle files? ???

Cheers Ceri
On 25 Nov 2014 00:38, "Tim Moore" <timmoore47 at gmail.com> wrote:

> Mega Brilliant, congratulations to all involved !
>
> :  )))))
>
> Tim_1
>
> On 24 November 2014 at 23:43, Justin Mitchell <
> justin at swansea.hackspace.org.uk> wrote:
>
>> On Mon, 2014-11-24 at 23:34 +0000, Graham Owens wrote:
>> > Well done guys, glad you got it all sorted.  Its a nice cut you got
>> > from it.  Was this your first cut or did you have a couple of attempts
>> > getting the z height correct?
>>
>> The board wasnt terribly flat/level, so our first depth only worked in
>> some places, so we ran it again a little deeper and faster.
>>
>> Lots of trial and error, many lessons learnt.
>>
>> one lesson was that a 0.9mm drill bit will obliterate standard/small
>> round pads that arent connected to a track, so i have a bit more
>> tweaking to do in the pcb layout or the isolation routing
>>
>>
>> _______________________________________________
>> Hackspace mailing list
>> Hackspace at swansea.hackspace.org.uk
>> http://swansea.hackspace.org.uk/mailman/listinfo/hackspace
>>
>
>
> _______________________________________________
> Hackspace mailing list
> Hackspace at swansea.hackspace.org.uk
> http://swansea.hackspace.org.uk/mailman/listinfo/hackspace
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://swansea.hackspace.org.uk/pipermail/hackspace/attachments/20141125/2b54a29d/attachment.html>