[Swansea Hackspace] Anyone got any two colour laserable acrylic spare?
Tim Clark
eclipse at sucs.org
Fri Aug 19 15:50:33 BST 2016
The flow sensor is broken and should be bypassed already, but if its not
working then the bypass may have fallen off.
Tim
On 19/08/2016 15:48, Nathan Hackett wrote:
> More good ideas, that could definitely work. I have some sugru already
> spare, but actual paint would probably give a nicer finish if I can
> get it to pool in the letters slightly concave. So is the flow sensor
> not working and needs to be bypassed? I've been ok using the laser
> cutter on my own before, but not without anyone else in the building.
> I'll try not to burn the place down. :)
>
> On Fri, Aug 19, 2016 at 3:31 PM, Tim Clark <eclipse at sucs.org
> <mailto:eclipse at sucs.org>> wrote:
>
> The other thought is you could stick masking tape over before you
> cut it, then you could flood the paint in after to fill the
> letters, let it dry a bit and peel the tape off, then you can give
> it to them before the paint is fully dry, but dry enough.
>
> Tim
>
>
> On 19/08/2016 15:26, Nathan Hackett wrote:
>> Not a bad idea Tim, thanks. This has to be ready for 10pm
>> Saturday night so I haven't left myself much time for luxuries
>> like letting paint dry! Off to B&Q to get the wood now. I guess I
>> could make an A-frame style sign just out of acrylic, but heating
>> and putting the bend in has the potential for disaster.
>> Is the laser cutter working ok at the moment?
>>
>> On Fri, Aug 19, 2016 at 3:19 PM, Tim Clark <eclipse at sucs.org
>> <mailto:eclipse at sucs.org>> wrote:
>>
>> You could paint something then laser the paint off?
>>
>> Tim
>>
>>
>> On 19/08/2016 15:13, Nathan Hackett wrote:
>>> I need to make a desk sign for someone at my work who's
>>> leaving to become a teacher, it's his last shift tomorrow
>>> night so this is very last minute. If anyone has any
>>> suitable scraps, size is roughly 200mm x 60mm. This is the
>>> sort of thing-
>>>
>>> http://www.snamanufacturing.co.uk/images/pic-04_5_large.jpg
>>> <http://www.snamanufacturing.co.uk/images/pic-04_5_large.jpg>
>>>
>>> Or maybe it would work better to laser etch some
>>> single-color acrylic and put sugru into the letters? Any
>>> advice would be greatly appreciated... Bat signal activated. :)
>>>
>>>
>>> _______________________________________________
>>> Hackspace mailing list
>>> Hackspace at swansea.hackspace.org.uk
>>> <mailto:Hackspace at swansea.hackspace.org.uk>
>>> http://swansea.hackspace.org.uk/mailman/listinfo/hackspace
>>> <http://swansea.hackspace.org.uk/mailman/listinfo/hackspace>
>> _______________________________________________ Hackspace
>> mailing list Hackspace at swansea.hackspace.org.uk
>> <mailto:Hackspace at swansea.hackspace.org.uk>
>> http://swansea.hackspace.org.uk/mailman/listinfo/hackspace
>> <http://swansea.hackspace.org.uk/mailman/listinfo/hackspace>
>>
>> _______________________________________________
>> Hackspace mailing list
>> Hackspace at swansea.hackspace.org.uk
>> <mailto:Hackspace at swansea.hackspace.org.uk>
>> http://swansea.hackspace.org.uk/mailman/listinfo/hackspace
>> <http://swansea.hackspace.org.uk/mailman/listinfo/hackspace>
> _______________________________________________ Hackspace mailing
> list Hackspace at swansea.hackspace.org.uk
> <mailto:Hackspace at swansea.hackspace.org.uk>
> http://swansea.hackspace.org.uk/mailman/listinfo/hackspace
> <http://swansea.hackspace.org.uk/mailman/listinfo/hackspace>
>
> _______________________________________________
> Hackspace mailing list
> Hackspace at swansea.hackspace.org.uk
> http://swansea.hackspace.org.uk/mailman/listinfo/hackspace
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://swansea.hackspace.org.uk/pipermail/hackspace/attachments/20160819/7566d234/attachment.html>
More information about the Hackspace
mailing list