[Swansea Hackspace] Anyone got any two colour laserable acrylic spare?

[Nathan Hackett]

So yeah, the led won't come on... I had a look and I'm guessing you mean
the green alligator clip that's shorting the two green wires coming from
the sensor board? The other end isn't attached to anything.

On Fri, Aug 19, 2016 at 5:12 PM, Justin Mitchell <
justin at swansea.hackspace.org.uk> wrote:

> On Fri, 2016-08-19 at 15:50 +0100, Tim Clark wrote:
> > The flow sensor is broken and should be bypassed already, but if its
> > not working then the bypass may have fallen off.
>
> to emphasize the point. make sure the water pump is running correctly
> before turning the laser cutter on, as the sensor wont check for you
> just now.
>
> if you cant get the laser enabled led to light and have checked
> everything else, make sure the cable that is bypassing the little flow
> sensor board hasnt fallen off.
>
>
>
> _______________________________________________
> Hackspace mailing list
> Hackspace at swansea.hackspace.org.uk
> http://swansea.hackspace.org.uk/mailman/listinfo/hackspace
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://swansea.hackspace.org.uk/pipermail/hackspace/attachments/20160819/5c0095b3/attachment.html>