[Swansea Hackspace] bench power supply
Andy Davies
andy at andydavies.info
Sat Aug 18 23:46:08 BST 2018
I thought you might
Do you do your own? Are there grades of ally that are not suitable? I read that 6082 doesn’t work.
Cheers
Andy
From: Andy Rush
Sent: Saturday, August 18, 2018 7:27 PM
To: Swansea Hackspace
Subject: Re: [Swansea Hackspace] bench power supply
Hey
Why yes, I do!
Andy (Lightsabers)
--------------------------------------------------------------------------------
From: Hackspace <hackspace-bounces at swansea.hackspace.org.uk> on behalf of Andy Davies <andy at andydavies.info>
Sent: 18 August 2018 17:40
To: Swansea Hackspace
Subject: Re: [Swansea Hackspace] bench power supply
Hi
Does anyone know about anodising aluminium?
Cheers
Andy
From: Ceri Clatworthy
Sent: Friday, August 10, 2018 4:15 PM
To: Swansea Hackspace
Subject: Re: [Swansea Hackspace] bench power supply
I am pritty sure PSU ripple will not be visible.
It's going to be in KHz range.
Probably burst not fixed rate
Anyway
You will still need a few Ohms resistor.
And 500uF will soak that up.
On Fri, 10 Aug 2018 12:57 Andy Davies, <andy at andydavies.info> wrote:
CPC have a bigger range of Tenma units at better prices
http://cpc.farnell.com/w/c/test-equipment/bench-power-supplies-sources-loads/bench-top-power-supplies/prl/results?output-voltage-max=40v|50v|56v|60v|75v|80v&sort=P_PRICE
From: Ceri Clatworthy
Sent: Friday, August 10, 2018 12:25 PM
To: Swansea Hackspace
Subject: Re: [Swansea Hackspace] bench power supply
just had a look at the PSU, (would not load on my phone ?!!?!?!)
Looks suitable for you, BUT the current is ONLY adjustable with a screwdriver, !!!!!
I would recomend Farnell / RS / CPC etc not ebay ..
http://uk.farnell.com/w/c/test-measurement/bench-power-supplies-sources-loads/bench-top-power-supplies?no-of-outputs=1-output&output-voltage-max=60v&sort=P_PRICE
72-2695 - Bench Power Supply, Linear, Adjustable, 1 Output, 0 V, 60 V, 0 A, 2 A is £77 and from Farnell..
have not checked the specs,
but from Farnell, you can get refund / swap if it goes BANG.
From eBay WHEN it goes BANG you are screwed !!!
On Thu, Aug 9, 2018 at 12:30 AM, Andy Davies <andy at andydavies.info> wrote:
Hi Ceri
I have three of these types for 6V (for powering a flashgun, 12V (for stepper motors and LEDs)) and 24V (for a stepper motor on a linear rail.
I’m looking for something that is a complete unit such as https://www.ebay.co.uk/itm/Adjustable-Linear-DC-Bench-Power-Supply-0-50V-0-3A-Variable-CSI5003XE/222258220290?epid=1542954192&hash=item33bf9f4d02:g:H9sAAOSw5OpZr-V8
but it is really important that no flicker shows up on the video at a shutter speed of 50fps.
Many thanks
Andy
From: Ceri Clatworthy
Sent: Wednesday, August 08, 2018 8:20 PM
To: Swansea Hackspace
Subject: Re: [Swansea Hackspace] bench power supply
Quick Google. ...
https://www.amazon.co.uk/voltage-converter-switch-power-supply/dp/B0197PNKJG/ref=br_lf_m_basujxxaeroo5oa_img?_encoding=UTF8&s=electronics
On Wed, 8 Aug 2018 20:17 Ceri Clatworthy, <ceri.clatworthy at gmail.com> wrote:
That's a high voltage !!!!!!!
A simple current source circuit will work the best for LEDs
One of my first jobs was KRAZY high power LED lighting designer
If you can get a 40 or so Volt PSU.
then easy circuit. ..
But I do recommend a protection resistor too
On Fri, 27 Jul 2018 12:45 Andy Davies, <andy at andydavies.info> wrote:
PS It is also important that it does not induce flicker in the light as I will be shooting video with it.
_______________________________________________
Hackspace mailing list
Hackspace at swansea.hackspace.org.uk
http://swansea.hackspace.org.uk/mailman/listinfo/hackspace
Virus-free. www.avg.com
----------------------------------------------------------------------------
_______________________________________________
Hackspace mailing list
Hackspace at swansea.hackspace.org.uk
http://swansea.hackspace.org.uk/mailman/listinfo/hackspace
_______________________________________________
Hackspace mailing list
Hackspace at swansea.hackspace.org.uk
http://swansea.hackspace.org.uk/mailman/listinfo/hackspace
------------------------------------------------------------------------------
_______________________________________________
Hackspace mailing list
Hackspace at swansea.hackspace.org.uk
http://swansea.hackspace.org.uk/mailman/listinfo/hackspace
_______________________________________________
Hackspace mailing list
Hackspace at swansea.hackspace.org.uk
http://swansea.hackspace.org.uk/mailman/listinfo/hackspace
--------------------------------------------------------------------------------
_______________________________________________
Hackspace mailing list
Hackspace at swansea.hackspace.org.uk
http://swansea.hackspace.org.uk/mailman/listinfo/hackspace
--------------------------------------------------------------------------------
_______________________________________________
Hackspace mailing list
Hackspace at swansea.hackspace.org.uk
http://swansea.hackspace.org.uk/mailman/listinfo/hackspace
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://swansea.hackspace.org.uk/pipermail/hackspace/attachments/20180818/5c12f53b/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: wlEmoticon-smile[1].png
Type: image/png
Size: 1046 bytes
Desc: not available
URL: <http://swansea.hackspace.org.uk/pipermail/hackspace/attachments/20180818/5c12f53b/attachment.png>
More information about the Hackspace
mailing list